Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

I need advise ASAP with net pots.
I have 2,000 2"poppleman and made sure to tell the supplier I wanted the one with the lip so it doesn't fall thru. It took a while to receive them and yesterday when we started drilling holes, found that they slipped thru when using the 2" holesaw. The supplier sent me a photo of the only other one poppleman sells, but it's called a slit pot. The openings are larger. It's hard to tell but that looks like it could possibly have a larger "lip" to prevent it from slipping thur..Please advise asap, I had some volunteers coming this weekend and need the supplies!

Views: 83


You need to be a member of Aquaponic Gardening to add comments!

Join Aquaponic Gardening

Comment by Michelle Silva on August 30, 2010 at 12:02pm
yeah! Thanks Cosmo, I'll check other stores first.
Comment by M Cosmo on August 30, 2010 at 12:02pm
I would suggest a 1 7/8" hole saw. There a quite a few on Amazon. The other hardware stores and Lowes. Ask them to check out the Hole saw Kits for door handles and see if there is a 1 7/8" hole saw blade in it. If now pick one on Amazon and get it shipped 2 day. You should be fine. Don't forget that it needs to match the arbor.

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service