Tags:
I expect Sylvia is going to be trying to turn a pump on and off. Perhaps a 145 watt AC pump would suite her purposes.
Chi is going to try controlling valves so he could get by with a low voltage controller.
John R said:
Could you provide a bit more information about what you are trying to control? Is it a DC or AC pump? Or do you need to turn a valve on or off and if its a valve control, what are the power requirements? There are a mountain of industrial timer controls out there but without the output specification I can't find a specific one for you.
I think this might work:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&nam...
If you search on their home page for "cycle timer" you can find more. This is the first one I found that looks like it will fit your requirements.
Instruction Manual |
|
This cycle timer is capable of accurately cycling equipment in increments from 10 seconds to 20 minutes of "ON" time and 1 minute to 12 hours of "OFF" time between cycles. Timer has a built-in photosensor that cuts the timer off when it gets dark. Photosensor may be switched on or off as desired. It is ideally suited for irrigation, misting, drip, and ventilation controls to name a few. Solenoid valve is needed to automate most misting, drip, and irrigation systems. Timer plugs into a standard 110/120 volt outlet and has an outlet on the front for the device it will control (15 amp max) | |
Price: $79 qty:
|
Any resolution Sylvia?
beware the screens and any metal in those hose end irrigation timers. I expect those to clog just with my tap water regularly let alone fish water. Metal not good with fish water either.
Have you actually tested this hose timer with your pump pressure? Not all pumps provide enough pressure for these to work and if you are going to have any period of timer where both outlets are closed and your pump still running you may wind up killing your pump so you probably need to set it such that both outlets are never closed at the same time.
That's exactly what happened regarding the clogging and pressure issues. I did have it set to run at different times but it clogged quickly. Oh well. Thought about building something out of 4" PVC to filter the water first, but that's getting too complicated for now. Less is more.
TCLynx said:
beware the screens and any metal in those hose end irrigation timers. I expect those to clog just with my tap water regularly let alone fish water. Metal not good with fish water either.
Have you actually tested this hose timer with your pump pressure? Not all pumps provide enough pressure for these to work and if you are going to have any period of timer where both outlets are closed and your pump still running you may wind up killing your pump so you probably need to set it such that both outlets are never closed at the same time.
I'm not using an irrigation solenoid.
http://www.grainger.com/Grainger/ALCON-Solenoid-Valve-5WNF1
- Watering Schedules can be set according to four different programs for model C032:
- Standard watering cycle: 7 day programming schedule with four start time per day
- Cyclical watering cycle: From 1 to 30 days with one start time per day
- Repeat watering cycle: From 1 hour to 23 hours per day
- Repeat watering cycle: From 1 minute duration, 5 minutes interval with open window to start in AM or PM and a window to close in AM or PM
You can use a repeat cycle timer and the proper wall wart to run an irrigation valve but that only works if the valve will function under the pressure available from your pump and if closing the valve won't burn up your pump.
http://www.littlegreenhouse.com/accessory/controls2.shtml
Scroll down until you get to the Titan Apollo 2.
Here is a repeat cycle timer with a switch to choose between day/night/always operation and it has a reset switch which I have really found helpful.
I also have one of the Titan repeat cycle timers too and they seem to work well also, just a bit trickier to set between day/night/always operation and no re-set switch.
© 2024 Created by Sylvia Bernstein. Powered by