Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

Plumbing to multiple growbeds with or without index valve?

I am finally starting to purchase all the parts I need for my system. I was wondering what the best way to plumb the growbeds from the fish tank in a CHIFT PIST system. Is an index valve always necessary?

I am planning on using a SLO to flow water out of two fish tanks and planning on having six growbeds. Everything will be made from IBC tanks.

My original idea was simply a long pvc pipe with a "T" for the first bed, a "T" for the second and then an elbow at the end but this seems like there would be varying water flow. Is this true?

Please give any suggestions. Thanks.

Views: 867

Reply to This

Replies to This Discussion

Hi Jason,

You can use ball valves to regulate the flowrate for each bed.

No, an indexing valve is not necessary.  You can either pump to one bed at a time using an indexing valve or pump/drain to all beds at once and use siphons.  Chances are, you'll need a sump, if you go with siphons - either that or you'll live with a good bit of fluctuation in the level of your fish tank.  

Silly me, chist pist, by definition, means you intend to have a sump tank. Therefore, you don't need an indexing valve.  Possibly you've been hanging out on an aussie site.

I've been using an indexing valve and I like it but most people use siphons.  The indexing valve seemed simpler to me and I didn't want to fool with siphons and sump - still don't.

Wait, can you use an indexing valve with a chift pist? My impression of indexing valves is that they require the flow of water to be interrupted to switch valves and since the pump in a chift pist is always going...

Thanks Harold and George. The ball valves sound like the best way to go if I am not using an index valve. I think I'll add an overflow pipe from the fish tank back into the sump tanks just in case (I have 3 IBCs I'll use for the sump so if I want to expand then I can). 

I do not plan on using an index but good question Alex. I do not know...

What brand timer do you use to turn on and off your water flow to your indexing valve? Any advise on type?

George said:

No, an indexing valve is not necessary.  You can either pump to one bed at a time using an indexing valve or pump/drain to all beds at once and use siphons.  Chances are, you'll need a sump, if you go with siphons - either that or you'll live with a good bit of fluctuation in the level of your fish tank.  

Silly me, chist pist, by definition, means you intend to have a sump tank. Therefore, you don't need an indexing valve.  Possibly you've been hanging out on an aussie site.

I've been using an indexing valve and I like it but most people use siphons.  The indexing valve seemed simpler to me and I didn't want to fool with siphons and sump - still don't.

Sorry Mark, just now saw your question.  See the link below to the timer I've been using for 2 1/2 years.  

http://www.aquaponiclynx.com/products/aquaponic-systems-and-compone...

I believe TCLynx uses indexing valves in pairs - and uses a 3way pool valve with electric actuator - she doesn't stop the pump, just changes from one valve to another. That way she doesn't need to turn the pump actually off.

Alex Veidel said:

Wait, can you use an indexing valve with a chift pist? My impression of indexing valves is that they require the flow of water to be interrupted to switch valves and since the pump in a chift pist is always going...

Reply to Discussion

RSS

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service