Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

TCLynx's Discussions (6,858)

Discussions Replied To (530) Replies Latest Activity

"I can help with pump sizing for indexing valves situations as I am near the manufact…"

TCLynx replied May 5, 2011 to Sizing Grow beds

15 May 9, 2011
Reply by TCLynx

"Yes, always stop to think before you embark on a system modification.  "Will this im…"

TCLynx replied May 4, 2011 to Sizing Grow beds

15 May 9, 2011
Reply by TCLynx

"It might be wise to get some samples of your proposed water tested to see if there i…"

TCLynx replied May 4, 2011 to "wild" water source

3 May 6, 2011
Reply by Converse

"Biggest challenge will probably be sizing the holes in the bottom of the stand pipe…"

TCLynx replied May 4, 2011 to Sizing Grow beds

15 May 9, 2011
Reply by TCLynx

"You simply want to make sure you are actually moving at least 1200 gallons of water…"

TCLynx replied May 3, 2011 to Sizing Grow beds

15 May 9, 2011
Reply by TCLynx

"The quiet one 4000 pumps I don't expect to burn up just sucking a little air (I've b…"

TCLynx replied May 3, 2011 to Pump question

2 May 3, 2011
Reply by B. Pearcy

"I would not extend water delivery pipe below the gravel (roots will grow into it and…"

TCLynx replied May 2, 2011 to Best way to deliver water to grow beds

4 May 5, 2011
Reply by B. Pearcy

"Start off doing lots of reading.  But, also, you can learn lots by starting a small…"

TCLynx replied May 2, 2011 to Planning my system

3 May 2, 2011
Reply by TCLynx

"Chi is right.  If you were to put a valve on the drain or any restriction on the dra…"

TCLynx replied Apr 27, 2011 to Stand Pipe Flow Question

7 Apr 28, 2011
Reply by Lonny Harper

"I have seen issues with "sliming" of the gravel around the water inlet on constant i…"

TCLynx replied Apr 26, 2011 to Flood distribution in media bed

4 Apr 27, 2011
Reply by RW

RSS

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service