Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

Harold Sukhbir's Discussions (1,079)

Discussions Replied To (882) Replies Latest Activity

"Hi Darlene, Try cutting out a circular patch from the same or similar material, over…"

Harold Sukhbir replied Oct 22, 2011 to IBC Tote system

5 Oct 22, 2011
Reply by Darlene Skellion

"Hi Colin, Don't know how that's going to happen when it comes to me! "

Harold Sukhbir replied Oct 21, 2011 to 3000th Member Contest!

137 Oct 23, 2011
Reply by Sylvia Bernstein

"Hi Timothy, The media bed which contains the bacteria needed for converting ammonia…"

Harold Sukhbir replied Oct 19, 2011 to water loss

6 Oct 19, 2011
Reply by Harold Sukhbir

"Nov 22nd 12.05 pm"

Harold Sukhbir replied Oct 17, 2011 to 3000th Member Contest!

137 Oct 23, 2011
Reply by Sylvia Bernstein

"Hi Averan, I too realize my post may have given the wrong impression,sorry. I meant…"

Harold Sukhbir replied Oct 15, 2011 to A Simple System

72 Oct 17, 2011
Reply by Averan

"Hi Tommy, Really cool idea!. A small airlift pump, meshed balancing holes in FT, at…"

Harold Sukhbir replied Oct 15, 2011 to How do make a failproof flood/drain system, when my growbed is UNDER my fishtank?

15 Oct 16, 2011
Reply by Tommy Denda

"Hi Averan, Actually one of my barrels is slightly tilted to one side, so i heated an…"

Harold Sukhbir replied Oct 14, 2011 to A Simple System

72 Oct 17, 2011
Reply by Averan

"Hi Averan, The bottom of my barrels are curved,so i put a pipe fitting through the b…"

Harold Sukhbir replied Oct 14, 2011 to A Simple System

72 Oct 17, 2011
Reply by Averan

"Hi Timothy, If you're cycling continuously (24hr/day) and water is spread over a wid…"

Harold Sukhbir replied Oct 14, 2011 to water loss

6 Oct 19, 2011
Reply by Harold Sukhbir

"Hi Averan, Refusing to start can mean too low flow rate not allowing the water flowi…"

Harold Sukhbir replied Oct 14, 2011 to A Simple System

72 Oct 17, 2011
Reply by Averan

RSS

© 2025   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service