Comment by Omari Jaffe on November 9, 2012 at 4:02am
i started with a 2 inch tee and two 2 inch reducer to 1 inch pipe. i drilled out one end of the 2inch reducer so i could slide the 1 inch standpipe through which is not visible but it is in the 2 inch length of pvc pipe ( right side of the photo ). there is also a bell siphon in the 2 inch pvc pipe, it is also not visible but the end cap of the bell could be seen (also right of the photo). i drilled hole into the bottom of the bell to allow water to flow in and a lil higher i drilled one hole to assist in the breaking process.
Comment by John Cubit on November 8, 2012 at 7:19pm
You need to be a member of Aquaponic Gardening to add comments!
Join Aquaponic Gardening