Comment

Comment by mike ormond on January 6, 2016 at 3:27am

smart idea, looks useful. thanks i'll give a try

Comment by edward bentley on December 30, 2015 at 1:09pm

can you show a picture of it in use?

thanks

edward

Comment by Chris " Wild Dog " S. on December 29, 2015 at 6:17pm

This works just like a water bridge, to move water out of a tank or container. No Holes needed in tank or container. use a water hose to start the flow from your tank. or use a tube to suck air out of the water bridge part of assembly. once a siphon is started and water is flowing out the "T" fitting, You will never have to prime this again. (unless air gets into it) power can be off and this will drain water to a certain point = the outlet side of "T" fitting, and wait for water to be added to tank before flowing again. This is useful for anyone with several tanks supplied by 1 water pump and will flow through them all. the part rising above the "T" fitting, is a breather tube or snorkel. this prevents the assembly from siphoning out the entire tank. by equalizing the atmospheric pressure between the tank and exit side of "T" fitting. water will "sit in the 2 "U" shaped parts of this assembly once primed.