Comment

Comment by Jim Fisk on September 29, 2014 at 10:28am

This is the article if I am not mistaken HERE

Comment by Jeremiah Robinson on September 29, 2014 at 8:50am

Sure. Send it to my email: j@coldweatheraquaponics.com

Comment by Jeff S on September 29, 2014 at 8:38am

Jeremiah, If you'd like I can try to send you the whole 16 page article. I found it to answer a lot of questions I've had in the past.

Comment by Jeremiah Robinson on September 29, 2014 at 7:16am

Cool - thanks Jeff!  I think I'll add some fingerlings to my swirl filter.  

Comment by Jim Fisk on September 28, 2014 at 10:10am

Here is a pic looking into my latest SF:As you can see it just has a 90 at the inlet that sets up the swirl action and a T with a 45 at the bottom which traps the floaters and impedes the suspended solids of any weight as the flow into the outlet is in the opposite direction from the swirl. 1 1/2" in and out using Uni-seals. There is a 1" drain in the bottom to drain solids if the get too deep. The floaters break down right in the filter. No more messy solids in the GB media. Note the short pipe section on the top of the T so the floaters won't go over the top but allows for an overflow and siphon breaker.

Comment by Jeff S on September 28, 2014 at 8:14am

Comment by Jeff S on September 28, 2014 at 8:13am

Comment by Jim Fisk on September 28, 2014 at 7:07am

You can copy and paste a pdf into a blog or new topic. It will paste as a text document.

Comment by Jeremiah Robinson on September 27, 2014 at 10:03pm

I don't think you can attach a pdf.  If you can upload it somewhere - such as dropbox or google drive - you can link to it.  I'd love to see it!

Comment by Jeff S on September 26, 2014 at 7:08pm

Jim, I sent you a message.

• ‹ Previous
• 1
• 2
• 3
• 4
• 5
• Next ›
• Page