Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

Views: 286

Comment

You need to be a member of Aquaponic Gardening to add comments!

Join Aquaponic Gardening

Comment by Gavin Lee on September 20, 2013 at 7:41pm

think a wood steamer would work to soften the pvc? no,electrical heating

(100c 210f)because you could make one pretty cheaply to hand shape it on a cardboard piling mold. the bricks look 3x6  so that would make the pipe 2 inch.300 degree celsius for soft

Comment by Gavin Lee on September 20, 2013 at 7:35pm

2' also ok,3'=75mm internal diameter

Comment by Michael Silberstein on September 9, 2013 at 6:43pm

75mm would be almost 3 inches? would 2" not work?

Comment by Michael Silberstein on September 9, 2013 at 6:34pm

think a wood steamer would work to soften the pvc? (100c 210f)because you could make one pretty cheaply to hand shape it on a cardboard piling mold. the bricks look 3x6  so that would make the pipe 2 inch.

Comment by Gavin Lee on September 7, 2013 at 1:36am

diameter 75mm pvc pipe,

clay pellets for root grow

Comment by Gavin Lee on September 7, 2013 at 1:22am

造价太高啊,cost too high,don't suit suburban plot hedges 

Comment by sally cummings on August 27, 2013 at 6:55pm

very neat

Comment by Alex Veidel on August 26, 2013 at 1:16pm

Okay, now THAT is the coolest application of NFT I've seen yet. Looks like a tree nursery! Could you imagine if they replaced suburban plot hedges with something like this?

Comment by Converse on August 26, 2013 at 8:36am

  Scale is difficult for me to determine...What is the diameter of the vertical pipe and the spiral pipes?  Any challenges with roots clogging the water flow?  Looks very aesthetically pleasing! 

© 2020   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service