Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

2 Trout Bio-filters

2 Trout Bio-filters

These sit above their respective 330g Trout FTs here showing waste drain lines that go thru outer drum and into bottom of swirl filter. Be sure and support them well as they weigh 480lbs between them. I used bed frame angle iron to give the deck planks more support.

Views: 105

View Full Size

Albums: Trout Tank Bio-Filter
Location: Smoky Mountain Aquaponics

Comment

You need to be a member of Aquaponic Gardening to add comments!

Join Aquaponic Gardening

Comment by steven w clark on June 8, 2017 at 2:19pm

Thank you very much

Comment by Jim Fisk on June 8, 2017 at 9:16am

Interesting, I found it by Googling "Jim Fisk, fish feeder". Came right up.

http://aquaponicgardening.ning.com/group/ibc-aquaponics/forum/topic...

Comment by Jim Fisk on June 8, 2017 at 9:07am

I did a write up on them somewhere here. I'll look for it later.

Comment by steven w clark on June 7, 2017 at 10:32pm

you have a parts list or a build guide for feeders?

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service