Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

I erroneously put this discussion on Page 2. Not really sure anyone will find page 2. For now I'll leave it there but wanted you all to know it existed.

Views: 1445

Replies to This Discussion

You should plan on drawing off the bottom and off the top for a skimmer effect. I think you are asking for trouble inverting the ibcs, Click on my avatar and ck out my pics. I am pretty sure I have some of my FT exit system where I use an air stone on top of the PU tube to draw the waste toward the tube. I will try and help you more after work today. Got to run.

OK I looked at your picks. I'm thinking I may put them on the north wall in a line with bio and sump in the nw corner to be able to work on the tanks easier. or put the tanks outside with the bio-filter and sump inside.

Great pics Jim. I've had my IBC going for about 6 months as well but only have the pump on the bottom and no other plumbing. I couldn't ask for a cleaner tank so I'm wondering if I'm missing a future problem that might occur. The only other thing that might attribute to the clean tank is my algae eater that keeps the the algae under control.



Jim Fisk said:

Here is the link to page 2 which is not all that easy to find:

http://community.theaquaponicsource.com/group/ibc-aquaponics/page/h...

Probably is the algae eater but algae coated tanks are actually good if under control as the algae add oxygen if they remain just on the sides. They only pose a problem if they are heavy and suffer a die off. Then they consume oxygen. Mine are pretty well coated and I feel that is a good thing and sort of isolates the system from the plastics.

RSS

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service