South Central Louisiana Newbie AP Plans - Will it work? - Aquaponic Gardening2024-03-29T09:29:29Zhttps://aquaponicgardening.ning.com/forum/topics/south-central-louisiana-newbie-ap-plans-will-it-work?commentId=4778851%3AComment%3A370675&feed=yes&xn_auth=noHello Tracy and all you guys.…tag:aquaponicgardening.ning.com,2017-06-28:4778851:Comment:6424142017-06-28T14:31:18.757ZShelby Smithhttps://aquaponicgardening.ning.com/profile/ShelbySmith
<p>Hello Tracy and all you guys. I am in Covington, La. and happy to see others around here doing this too. This is my first post on the forum as I am just starting out with AP. So far I have two IBC's cut down into three 12 inch GB's and a single FT. I am still sanding rough edges and collecting buckets and barrels for swirl filters and Dutch buckets. I also found a 30 by 45 foot greenhouse that hadn't been used in ten years and in bad shape, overgrown and with trees growing up through it. I…</p>
<p>Hello Tracy and all you guys. I am in Covington, La. and happy to see others around here doing this too. This is my first post on the forum as I am just starting out with AP. So far I have two IBC's cut down into three 12 inch GB's and a single FT. I am still sanding rough edges and collecting buckets and barrels for swirl filters and Dutch buckets. I also found a 30 by 45 foot greenhouse that hadn't been used in ten years and in bad shape, overgrown and with trees growing up through it. I offered the owner a hundred bucks to haul the frame off and she was happy to get it. </p>
<p> I was disappointed to find Tilapia were not practical in La due to legal regulations. That leaves me with either Catfish or Bluegills. I may try a tank of each to see what works better.</p>
<p> I took a trip to Robert to see the Huge Tilapia farm there. There must be two acres under glass. I showed up on a Sunday and the guys was cooking venison burgers on the grill but seemed happy to show me all around the place and offered to help any way he could with my project. I'll probably go back to see if I can get a piece of filter media to cycle my system when I'm ready. I hope to be up and running by the fall. </p>
<p> I could use a couple more IBC's, especially at $50 each. I would like full size tanks then I could turn mine into a sump.</p>
<p> </p> I thought that there would be…tag:aquaponicgardening.ning.com,2017-05-05:4778851:Comment:6408952017-05-05T14:18:12.726ZYaacov Levihttps://aquaponicgardening.ning.com/profile/YaacovLevi
<p>I thought that there would be lots of replies to this, else I would have. Anyhow I would expect it to work, but you could make it more efficient. Just on the KISS principle.</p>
<p>I thought that there would be lots of replies to this, else I would have. Anyhow I would expect it to work, but you could make it more efficient. Just on the KISS principle.</p> HI Tracy,
I am a new member a…tag:aquaponicgardening.ning.com,2016-09-16:4778851:Comment:6344352016-09-16T21:13:07.715ZFrank Buffonehttps://aquaponicgardening.ning.com/profile/FrankBuffone
<p>HI Tracy,</p>
<p>I am a new member also but have been gardening this way for a few years. Check out my system at <a href="http://www.preppingconnections.com/aquaponics.html" target="_blank">http://www.preppingconnections.com/aquaponics.html</a></p>
<p>I probably live near you, I'm in BR.</p>
<p>My system goes from the fish tank to the grow beds and then drains to the sump tank which is then pumped back up the fish tank. I don't use a swirl tank. After a year of growing I wash the hydroton…</p>
<p>HI Tracy,</p>
<p>I am a new member also but have been gardening this way for a few years. Check out my system at <a href="http://www.preppingconnections.com/aquaponics.html" target="_blank">http://www.preppingconnections.com/aquaponics.html</a></p>
<p>I probably live near you, I'm in BR.</p>
<p>My system goes from the fish tank to the grow beds and then drains to the sump tank which is then pumped back up the fish tank. I don't use a swirl tank. After a year of growing I wash the hydroton and filter the water with a small pool filter. It gets all the solids out and restores the pH to an acceptable level. I use local bream in my tank and they are super hardy. I would be happy to help you in any way to get you growing.</p>
<p>Frank B.</p> Hey Gil,
I used to have a fri…tag:aquaponicgardening.ning.com,2016-08-09:4778851:Comment:6336292016-08-09T16:25:24.034ZLee Scotthttps://aquaponicgardening.ning.com/profile/LeeScott
<p>Hey Gil,</p>
<p>I used to have a friend named Gil Jones in Ocean Springs, Ms.</p>
<p>Is that you?</p>
<p>My Aquaponics system has been doing great for a few years now. I've learned in this area not to expect too much during the July & August months but come September it will all be back in full swing.</p>
<p></p>
<p>Hey Gil,</p>
<p>I used to have a friend named Gil Jones in Ocean Springs, Ms.</p>
<p>Is that you?</p>
<p>My Aquaponics system has been doing great for a few years now. I've learned in this area not to expect too much during the July & August months but come September it will all be back in full swing.</p>
<p></p> Hi Lee, I started with a barr…tag:aquaponicgardening.ning.com,2016-08-09:4778851:Comment:6338012016-08-09T12:33:47.844ZGilhttps://aquaponicgardening.ning.com/profile/Gil5
<p>Hi Lee, I started with a barrelponics system three years ago. I have since moved on to an all IBC system. I have eight grow beds, (each IBC bed cut down to 14" in height) one 300 gal fish tank supporting about 125 gold fish and one 250 gal sump tank also supporting gold fish. I do plan to raise table size catfish in time. I'm relatively new to Aquaponics as anyone can tell by checking the Aquaponics web sites. Right now I'm experiencing vegetable growing problems. I don't know if it's my…</p>
<p>Hi Lee, I started with a barrelponics system three years ago. I have since moved on to an all IBC system. I have eight grow beds, (each IBC bed cut down to 14" in height) one 300 gal fish tank supporting about 125 gold fish and one 250 gal sump tank also supporting gold fish. I do plan to raise table size catfish in time. I'm relatively new to Aquaponics as anyone can tell by checking the Aquaponics web sites. Right now I'm experiencing vegetable growing problems. I don't know if it's my water quality or some other thing I'm doing wrong. Well I'm in this now for the long haul. This is a real hobby for me now and this all started with Rob Bob. Find him, he's interesting, and a bit of fun. Good Luck to you.</p>
<p>Chat soon, Gil Jones, Kenner, Louisiana - <a href="mailto:giljones1778@gmail.com">giljones1778@gmail.com</a> </p> Greetings,
I'm in Slidell, La…tag:aquaponicgardening.ning.com,2012-07-20:4778851:Comment:3709672012-07-20T02:38:32.938ZLee Scotthttps://aquaponicgardening.ning.com/profile/LeeScott
<p>Greetings,</p>
<p>I'm in Slidell, La. (northeast of New Orleans) </p>
<p>I'm in the planning stages of my AP system and hope to have something on the ground before the end of July. I found a good source for IBC tanks in Baton Rouge. (food grade and about $50.) I'm glad to know others in Louisiana are doing Aquaponics.</p>
<p>When you get further along, post some pictures so we can enjoy the progress.</p>
<p>Greetings,</p>
<p>I'm in Slidell, La. (northeast of New Orleans) </p>
<p>I'm in the planning stages of my AP system and hope to have something on the ground before the end of July. I found a good source for IBC tanks in Baton Rouge. (food grade and about $50.) I'm glad to know others in Louisiana are doing Aquaponics.</p>
<p>When you get further along, post some pictures so we can enjoy the progress.</p> Thanks James. James Keller s…tag:aquaponicgardening.ning.com,2012-07-19:4778851:Comment:3707642012-07-19T18:09:07.675ZTracy Langlinaishttps://aquaponicgardening.ning.com/profile/TracyLanglinais
<p>Thanks James.<br></br> <br></br> <cite>James Keller said:</cite></p>
<blockquote cite="http://community.theaquaponicsource.com/forum/topics/south-central-louisiana-newbie-ap-plans-will-it-work#4778851Comment370340"><div><div class="xg_user_generated"><p>I am about to start construction on a second system that sounds similar to yours. Sump tank -> Grow Beds (one media-based and one raft-based) -> Fish Tank -> Swirl Filter -> Sump tank. But the thing that strikes me first about your…</p>
</div>
</div>
</blockquote>
<p>Thanks James.<br/> <br/> <cite>James Keller said:</cite></p>
<blockquote cite="http://community.theaquaponicsource.com/forum/topics/south-central-louisiana-newbie-ap-plans-will-it-work#4778851Comment370340"><div><div class="xg_user_generated"><p>I am about to start construction on a second system that sounds similar to yours. Sump tank -> Grow Beds (one media-based and one raft-based) -> Fish Tank -> Swirl Filter -> Sump tank. But the thing that strikes me first about your setup is how small the swirl filter is - I will only have a 110 gallon fish tank but plan on using at least a 40 gallon swirl filter to give that stuff plenty of time and space to settle out. I have a 600 gph pump and some extra aeration on the way from Amazon. Can't help you on the bluegills, i'm growing trout. Best of luck!</p>
<p>James </p>
</div>
</div>
</blockquote> Thanks for the feedback Bradl…tag:aquaponicgardening.ning.com,2012-07-19:4778851:Comment:3706752012-07-19T18:08:39.807ZTracy Langlinaishttps://aquaponicgardening.ning.com/profile/TracyLanglinais
<p>Thanks for the feedback Bradley. My GB is mounted on a solid wooden platform.<br></br> <br></br> <cite>Bradly said:</cite></p>
<blockquote cite="http://community.theaquaponicsource.com/forum/topics/south-central-louisiana-newbie-ap-plans-will-it-work#4778851Comment370845"><div><div class="xg_user_generated"><p>Tracy</p>
<p>I just finished setting up my system and am about to start it up just to see if I can control water temp before cycling the system.</p>
<p>One thing that snapped me (due to my…</p>
</div>
</div>
</blockquote>
<p>Thanks for the feedback Bradley. My GB is mounted on a solid wooden platform.<br/> <br/> <cite>Bradly said:</cite></p>
<blockquote cite="http://community.theaquaponicsource.com/forum/topics/south-central-louisiana-newbie-ap-plans-will-it-work#4778851Comment370845"><div><div class="xg_user_generated"><p>Tracy</p>
<p>I just finished setting up my system and am about to start it up just to see if I can control water temp before cycling the system.</p>
<p>One thing that snapped me (due to my ignorance) is that the IBC Tote top turned upside is not as strong as it could be. I used 12" of gravel in my 2 grow beds made from the tops and they both sagged down under the weight and I had to emty them out of roch, and put steel angle gridwork underneath both ways to support the weight. (If you use gravel like I did-I estimate the weight at about 1,100 pounds each growbed maybe). If you use hydroton it will weigh far less and may not present the problem I had. (I just couldn't afford the Hydroton).</p>
<p>Looking back...I think I would only use Tote Bottoms for my growbeds from now on...because the built in pallet bottom handles a lot of the support and weight concerns.</p>
<p> </p>
</div>
</div>
</blockquote> Tracy
I just finished setting…tag:aquaponicgardening.ning.com,2012-07-19:4778851:Comment:3708452012-07-19T18:04:49.827ZBradlyhttps://aquaponicgardening.ning.com/profile/Bradly
<p>Tracy</p>
<p>I just finished setting up my system and am about to start it up just to see if I can control water temp before cycling the system.</p>
<p>One thing that snapped me (due to my ignorance) is that the IBC Tote top turned upside is not as strong as it could be. I used 12" of gravel in my 2 grow beds made from the tops and they both sagged down under the weight and I had to empty them out of rock, and put steel angle gridwork underneath both ways to support the weight. (If you use…</p>
<p>Tracy</p>
<p>I just finished setting up my system and am about to start it up just to see if I can control water temp before cycling the system.</p>
<p>One thing that snapped me (due to my ignorance) is that the IBC Tote top turned upside is not as strong as it could be. I used 12" of gravel in my 2 grow beds made from the tops and they both sagged down under the weight and I had to empty them out of rock, and put steel angle gridwork underneath both ways to support the weight. (If you use gravel like I did-I estimate the weight at about 1,100 pounds each growbed maybe). If you use hydroton it will weigh far less and may not present the problem I had. (I just couldn't afford the Hydroton).</p>
<p>Looking back...I think I would only use Tote Bottoms for my growbeds from now on...because the built in pallet bottom handles a lot of the support and weight concerns.</p>
<p> </p> I am about to start construct…tag:aquaponicgardening.ning.com,2012-07-18:4778851:Comment:3703402012-07-18T20:24:40.841ZJames Kellerhttps://aquaponicgardening.ning.com/profile/JamesKeller
<p>I am about to start construction on a second system that sounds similar to yours. Sump tank -> Grow Beds (one media-based and one raft-based) -> Fish Tank -> Swirl Filter -> Sump tank. But the thing that strikes me first about your setup is how small the swirl filter is - I will only have a 110 gallon fish tank but plan on using at least a 40 gallon swirl filter to give that stuff plenty of time and space to settle out. I have a 600 gph pump and some extra aeration on the way…</p>
<p>I am about to start construction on a second system that sounds similar to yours. Sump tank -> Grow Beds (one media-based and one raft-based) -> Fish Tank -> Swirl Filter -> Sump tank. But the thing that strikes me first about your setup is how small the swirl filter is - I will only have a 110 gallon fish tank but plan on using at least a 40 gallon swirl filter to give that stuff plenty of time and space to settle out. I have a 600 gph pump and some extra aeration on the way from Amazon. Can't help you on the bluegills, i'm growing trout. Best of luck!</p>
<p>James </p>