Hello all,
My system is going up at this very moment (slowly, of course), so during the next few weeks I'll be asking for a lot of help. I'm trying to think of everything that can go wrong and humidity issues is at the top of my list. I've been warned by people in the know that the fish tank shouldn't even be in the same greenhouse with the plant and human population (I'll be living in it every other week for the next year) because of humidity issues. I have come up with two ways of dealing with it, and I'd appreciate any feedback I can get.
Ventilation: During the day I will have to keep greenhouse temperatures down. To facilitate this I went with what somebody told me is called a "poly-clerestory," so I'll go with that name. Basically, there is a 19m by 50cm vent at the top. Wind across the top will pull air in from the sides. I have a 30m by 3m roll of expensive insect netting on the way. This top venting out bit will use about 10m2 of it and the remaining 80m2 will be strategically placed along the lower areas of the greenhouse walls. During the day, the plastic gets rolled up, exposing the netting and allowing the air to come in. At night, the plastic gets rolled down, keeping as much warmth in the greenhouse as possible. The problem here is that I can imagine a lot of humidity during the night. I think the ventilation during the day will be OK.
Tank specific ventilation: My idea for meeting this challenge is pretty simple. If you look at the second illustration, you'll see that I'm thinking of draping greenhouse plastic over the tank and venting out (completely out of the greenhouse) using a simple bathroom fan or something similar. It seems to me that any condensate on the inside of the plastic over the tank will just dribble down the sides of the plastic back into the tank (conserving water). An alternative would be to do a chimney kind of thing instead of a fan which wouldn't require electricity.
Any thoughts? Here are the illustrations:
Tags:
Hi Richard - good luck with your project.
check this out for controlling the atmosphere in the the greenhouse
I was curious where you got your info regarding your greenhouse design. I am interested in more info on this type of design as I haven't been able to find much. I have seen this more commonly referred as "tropical" design. I recall reading that 1/3rd vent area to greenhouse floor plan is optimal for tropical climates but since you mentioned you are in a cooler micro climate your sketch seems appropriate. I guess even though a unique micro climate, you still get insane humidity like the rest of the area.
I ask because as of the new year, I plan to make a pretty drastic life change and move to the Mekong delta. Hot as a mofo and 100% humidity. I am trying to gather as much info as I can before I start my own life experiment :)
I was curious where you got your info regarding your greenhouse design. I am interested in more info on this type of design as I haven't been able to find much. I have seen this more commonly referred as "tropical" design. I recall reading that 1/3rd vent area to greenhouse floor plan is optimal for tropical climates but since you mentioned you are in a cooler micro climate your sketch seems appropriate. I guess even though a unique micro climate, you still get insane humidity like the rest of the area.
I ask because as of the new year, I plan to make a pretty drastic life change and move to the Mekong delta. Hot as a mofo and 100% humidity. I am trying to gather as much info as I can before I start my own life experiment
Most greenhouse ventilation controls are a combination of wind up side curtains (shade cloth screened), stirring fans, and extraction fans (an/or roof vents)...
For that size greenhouse... IMO... you need all three...
© 2024 Created by Sylvia Bernstein. Powered by