Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

Hi Everyone,

I am new to the forum and to aquaponics. We are doing our research to figure size of our greenhouse and are planning to use IBC totes. But I am not sure if the dimensions of the totes of 48 X 40 X 46 are just the tote or is that the outside dimensions of the cage. So I guess my question is, what is the outside dimensions of the metal cage? Hope someone can help me out.

Thanks,

Steve

Views: 294

Reply to This

Replies to This Discussion

Here is a link that may help.

http://www.daytonindustrialdrum.com/id26.html

Thanks Lee, I checked out the website and they have the measurements but I'm still not sure if there for the tote or the cage. No worries though I am going to a class up in Denver next Saturday and I'm sure I'll find out then.

Lee Scott said:

Here is a link that may help.

http://www.daytonindustrialdrum.com/id26.html

Our tote measures--tote, cage and 2 inch blue board for insulation 51x45x45

Steve i think those are my outside  cage dimensions  Hit me up tomorrow ill check 275 gal 

275 or 300 gal?

Thanks Verna, It looks like the totes come in different sizes. Is yours the 275 gal ?

Verna Gross said:

Our tote measures--tote, cage and 2 inch blue board for 51x45x45
Ours I believe is 275 totally full but the marks only go to 250

Hi Farcry, We expect to be getting the 275 gal tote, thanks!

Farcry305 said:

Steve i think those are my outside  cage dimensions  Hit me up tomorrow ill check 275 gal 

Reply to Discussion

RSS

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service