Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

I am trying to grasp how to correctly use the AquaBuffer pH Stabilzing Kit but something just isn't clicking for me.  Currently my pH is right around 7.  Using the KH test kit from API I measured 4 drops to turn the water from blue to slight yellow.  I'm not entirely sure what to do with this information however.  The included chart says 4 drops means I am at 71.6 ppm KH.  And I understand that I need 2 1/2 teaspoons to move 100 gallons of water 1 KH level.  There is a 2nd chart that says Tilapia should have a KH range of 50-100 ppm.  Does this mean my system is where it should be and I don't need to buffer anything?

Views: 90

Reply to This

Replies to This Discussion

Yes, your system is where it should be and you don't have to buffer anything (yet)...

Reply to Discussion

RSS

© 2020   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service