Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

Max Gfx's Discussions (72)

Search Forum

View

Discussions Replied To (39) Replies Latest Activity

"None...Matala is sold in sheets that are 24" x 39-1/2" and all densities are 1-1/2"…"

Max Gfx replied Nov 22, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"One more photo...This one shows how the water from the towers and NFT tube are retur…"

Max Gfx replied Nov 17, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"Here's a fairly clear view of my experimental system in my basement, it should give…"

Max Gfx replied Nov 17, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"Thanks a million on the approval of my hack job. :-) All 3 of my vertical planters…"

Max Gfx replied Nov 16, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"The fence post sleeves are what I first considered, but my main goal was to have som…"

Max Gfx replied Nov 16, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"I'd be curious to see your design just to see if there is anything that could improv…"

Max Gfx replied Nov 16, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"Here's the tower a coupe days after being planted with starter plugs. The plug is ju…"

Max Gfx replied Nov 16, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

"From my experience, the nitrification process takes a good amount of time (sometimes…"

Max Gfx replied Nov 13, 2013 to Why does it take so long to 'mature' a system?

 32 Dec 26, 2013
Reply by Rob Nash

"If ZipGrow towers are cost-prohibitive for you, it's not too hard to make a function…"

Max Gfx replied Nov 13, 2013 to Zip Grow Towers??

 62 Nov 20, 2015
Reply by John Petroschek

RSS

© 2024   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service