Aquaponic Gardening

A Community and Forum For Aquaponic Gardeners

Rob Nash's Discussions (373)

Search Forum

View

Discussions Replied To (326) Replies Latest Activity

"im with Rupert, dont add the bell siphon to your learning process. ...IMO i would go…"

Rob Nash replied Nov 3, 2012 to First project! Any help greatly appreciated :)

 14 Nov 5, 2012
Reply by Wes Wilson

"http://www.pexsupply.com/Temperature-Controllers-12741000 here is the temp controll…"

Rob Nash replied Nov 1, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

"submersible heater   "

Rob Nash replied Nov 1, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

"Craig, im not sure what they use.. but "they" dont apear too concerned with the huma…"

Rob Nash replied Nov 1, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

"Bob, i didnt realize you were pumping water through it... did you see the submersibl…"

Rob Nash replied Nov 1, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

"Bradly, keep an eye on the element at the top... when the heater runs, it will creat…"

Rob Nash replied Nov 1, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

"i like the hybrid design... im guessing the wires are going up and over the edge of…"

Rob Nash replied Nov 1, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

"try the DIY heater or look into spa heaters.... insulate the tank with reflective bu…"

Rob Nash replied Oct 31, 2012 to heating 450 gal tank

 4 Oct 31, 2012
Reply by Rob Nash

"i have found that Lowes stocks Stainless Steel elements... they are all 220 volt at…"

Rob Nash replied Oct 27, 2012 to DIY submersible water heater, build your own water heater

 127 Feb 8, 2015
Reply by Rob Nash

"Justin, the 1800 watt heater will heat the ibc, but you will have to insulate it to…"

Rob Nash replied Oct 9, 2012 to DIY Heater, build your own 2000 watt heater for $20 ***DONT USE COPPER OR NICKEL ELEMENTS!

 198 Jan 22, 2016
Reply by Steve R

RSS

© 2025   Created by Sylvia Bernstein.   Powered by

Badges  |  Report an Issue  |  Terms of Service