"Our general rule of thumb is to never use metal components in aquaponic plumbing. For any parts that will interact with water that fish will live in, use food safe plastic, vinyl tubing, and PVC pipe/fittings."
"You should try slowing down the water flow into your growbed. What is probably happening is the water is going in fast enough that the siphon is not breaking. You can add a ball valve on your line with the pump to adjust water flow."
"I personally haven't done it, but I don't see any reason why you couldn't. Depending on the type of fish you have, as they get larger they may begin eating the plant. Also, you would want to be sure that pieces of the…"
"I would be careful about using chlorine in the system. I'm afraid the residue might hurt the fish and prevent your bacteria from growing. I would clean it with a solution of H2O2 instead. The solution breaks down into harmless…"
"I would try cycling it again. You can leave the plants in, and maybe add some sea kelp or other natural fish-safe nutrient to keep your plants alive. I would try some AquaCycle, and follow the cycling instructions."
"What kind of fish do you have? Is your water temp right for them?
What is your water source? Are you filtering it?
I would try to slowly lower the pH to the low 7's.
My best guess is the addition of water after you flooded the sump messed…"
What are your ammonia, nitrite, pH, and temperature readings at? Did you recently change out a large volume of your water? This could have damaged your bacteria if the water was untreated. "
"You are correct that we do not allow advertising on this site. If people want to post that they have spare or used aquaponic supplies, thats fine. Community sites are about helping each other, and we encourage this collaboration.…"